DV Industrial Computer Ltd.
 | News  | Products  | Support  | Ordering  |   
B7364 Industrial computer TFT display that is protected by triplex on the front panel
Industrial computer B7364
The industrial computer B7364 consists of two main parts - 17" display enclosed in anti-vandal industrial housing DP73 and industrial chassis DW64 both have been put together as a single unit. The system provides impermeability and has IP66 protection level i.e. provides tight protection against dust and keeps out powerful water jets. The DW64 chassis is able to fit VIA EPIA CN, JNF77-1G6E Mini-ITX form-factor motherboard, 2,5" HDD and up to two expansion cards using riser card. More detailed information about DW64 chassis you can get following this link>>>. If you need only front panel impermeability direct at the B7365 computer.
The structure of the product
- Display DP73
- Chassis DW64
- Mini-ITX form-factor matherboard (the type of real motherboard depends on specification and has been listed below in Components section, ordering information)
- VESA100 mounting bracket
Display DP73
17" (43.1cm) flat TFT screen that has been armoured by extra glass (silicon-triplex) in waterproof anti-vandal housing.
- 0.3 mm pixel pitch. ТСО-99
- Resolution : max. VESA 1280 x 1024@75Hz
- power supply 12V (or 100~240VAC using AC-DC adapter, wich is the part of the B7365).
Height: 335mm
Width: 398mm
Depth: 121mm
Net weight: 11kg
Expansion slots
- 2x Full-height PCI expansion slot (horizontal) in case of riser card using
Drive bays
- 1x 2.5" HDD bay
Operating Environment
- System with IP66 protection level
- Operating Temperature Range: +15~40º
Power Supply
Power supply of the display and computer is realized separately. The display has to be powered by 12VDC 3,5A source. The AC-DC adapter of 100~240VAC mains into 12VDC is the part of the B7364. Power supplying is depended on PSU:
Input Voltage +24VDC
+3.3V 5A 5A 5.5A 5A
+5V 3A 5A 5A 5A
+5В sb 2A 2A 5A 5A
+12V 2A 2A 2A 2A
-12V 0.1A 0.1A 0.04A 0.1A
Height: 400mm
Width: 450mm
Depth: 130mm
Gross weight: 12kg
Available Colors
 RAL7032 Beige  RAL9005 Black

Ordering Information Part number Description
Chassis color B7364-xxx-xxx-W
Motherboard of the computer B7364-xxx-CN10-x
Power Supply of the computer B7364-045-xxx-x
45W DP031 (+12V~14VDC input) more info>>>
55W DP022 (Automotive, +10V~19VDC input) more info>>>
30W DP020 (+21V~30VDC input) more info>>>
50W DP021 (+21V~30VDC input) more info>>>

Optional Parts List Model Description
1U PCI riser card 1R This riser card changes the insert direction of the slot by 90 degrees. more info>>>
1.5U PCI riser card 1U5Rx2 This riser card expands a PCI slot into two PCI slots and changes the insert direction of the slots by 90 degrees. more info>>>
1U5R2 This riser card changes the insert direction of the slot by 90 degrees. more info>>>
2.5" HDD IDE cable - 44 to 40 pin cabel cable for 2.5" HDD, 150mm, ATA-33 more info>>>
2.5" HDD IDE adapter - 44 to 40 pin board adapter for 2.5" HDD, ATA-133 more info>>>
Universal AC/DC PSU S60-120350-WH01
Converter 100V-240V/50Hz to +12VDC/3,5A more info>>>
Converter 100V-240V/50Hz to +24VDC/2,0A more info>>>

click to view large picture

B7364, front view B7364, side view B7364, back view B7364, view without bracket
VESA100 fixture
click to view large picture

There are 4 screw holes with M4 thread on the back bracket of the B7364. These mounting holes allow mounting according to VESA100 standard. The computer can be attached to a wall/column/beam directly or using special (a multy-link articulated arm) device that has to be complied with VESA100 standard (as shown on the left picture). The B7364 computer is not supplied with such device. You have to buy such device as a separate part.

Leave airflows outside the B7364 free for cooling. Keep the B7364 computer away from a heat source and don't make high density placement of the B7364 within limited space to avoid overheating.

Home  | Contact Us  | About Us |