DV Industrial Computer Ltd.
 | News  | Products  | Support  | Ordering  |   
D26 19" 2U Ultra Cooled Сompact Сhassis 410mm DEEP
D26 chassis
Form Factor
2U chassis supports for extended(305x330mm) ATX size motherboard
Dimensions(mm)
Height: 88mm
Width: 483mm
Depth: 410mm
Net weight: 6.5kg
Expansion slots
-3x Full-height PCI expansion slot (horizontal)
- 6x Low Profile PCI expansion slot (vertical)
Drive Bays
- 5x HDD bay
Front Panel
LEDs:
- Hard drive activity
- Power
- Alarm
Buttons:
- Reset
- Power

Detailed description
System Cooling
- 4x 80x80x25 2800RPM fans, 3.72m3 total controlled by intelligent cooling system FanMagic®
- 1x 80x80 PSU fan
Operating Environment (System)
Operating Temperature Range: +5~50º
Power Supply
PSU 300W 350W 400W
Input Voltage 220VAC 220VAC 220VAC
+3.3V 20A 22A 30A
+5V 20A 21A 28A
+5V standby 2A 2A 2A
-5V 0.3A 0.3A 0.3A
+12V1
+12V2
16A
16A
18A
16A
18A
18A
-12V 0.8A 0.8A 0.8A
Package
Height: 120mm
Width: 510mm
Depth: 485mm
Gross weight: 7.5kg
Available Colors
 RAL7032 Beige     RAL9005 Black

Ordering Information Part number Description
Chassis color D26xxx-W
D26xxx-B
White(Beige)
Black
Power Supply D26300
D26350
D26400
300W
350W
400W

Optional Parts List Model Description
2xHDD cage 2HD26 2xHDD drive holder. more>>
3xHDD cage 3HDM24 3 x 2.5" HDD drive cage more>>
PCI riser card 2U1FR 1U riser changes the insert direction of the slot by 90 degrees. more>>
1U5R2 2xPCI to 2xPCI 1.5U right angle(90 degrees) riser. more>>
2U2FL 2U riser changes the insert direction of the slot by 270 degrees. more>>
PCIe riser card 2U1FR-e1 1U PCI Express x1 riser card changes the insert direction of the slot by 90 degrees. more>>
2U1FR-e4 1U PCI Express x4 riser card changes the insert direction of the slot by 90 degrees. more>>
Low Profile PCI brackets - more>>
Air filter F80 more>>
Cable-adapter 2 x HDD power SATA Power 2хSATA_L Cable-adapter 2 x HDD power 330mm length. more>>
Cable-adapter 3 x HDD power SATA Power 3хSATA IDC Cable-adapter 3 x HDD power 330mm length. more>>
Power Connector HDD SATA Power SATA Connector HDD SATA power connector. Just crimp it to wires yourself. more>>

PCI expansion slots. You should cutout some metal connection straps on the back side of chassis by nipper. You should cutout only those connection straps that would interfere with panel connectors. To make it easier, the connector zone of chassis' back side has been made netlike. Technical drawing
Back panel preparation when extention cards are installed D26, technical drawing


PHOTOGALLERY
click to view large picture

D26, front view D26, open D26, AMD uATX system with 4 HDD, Low Profile I/O card D26 in package
HDD installation
click to view large picture

You can install up to 5 3,5" HDD in chassis without additional equipment. By using additional cages 2HD26 from the optional parts list you can even put more than 5 HDD in chassis. But pay attention! It depends on motherboard depth and position of components on it in HDD installation zone. Apart from that, more HDD you install, more difficult it is to assemble the system and place the cables.

On the photo they managed to install 9 HDD in chassis by using 4 additional 2HD26 cages.


Home  | Contact Us  | About Us |