DV Industrial Computer Ltd.
 | News  | Products  | Support  | Ordering  |   
DL32 19" 3U Rackmount chassis 545mm DEEP
Form Factor
3U chassis support for extended ATX size (305x330mm) motherboard
Dimensions
Height: 132mm
Width: 483mm
Depth: 545mm
Net weight: 9kg (PSU 400W); 7kg w/o PSU
Expansion slots (full-height)
- 5x
Drive bays
- 4x HDD bay. Extended up to 8x by additional fixed HDD cages (see Optional Parts List and Application Notes below)
- 2x CDD bay
- 1x FDD bay with FDD cutout
Front Panel
LEDs:
- Hard drive activity
- Power
- Alarm
Buttons:
- Reset
- Power

Detailed description
System Cooling
- 2x 92x92x25 2500RPM fans, 2.86m3 total
- 1x PSU fan
Operating Environment (System)
Operating Temperature Range: +5~50º
Power Supply
PSU 300W 350W 400W 460W 550W
Input Voltage  -48VDC  220VAC  220VAC  100~
240VAC 
100~
240VAC 
+3.3V 28A 22A 30A 27A 27A
+5V 30A 21A 28A 29A 29A
+5Vstandby 2A 2A 2A 2A 2A
-5V 0.3A 0.3A 0.3A 0.3A 0.3A
+12V1
+12V2
15A
-
16A
16A
18A
18A
16.5A
15A
18A
18A
-12V 0.8A 0.8A 0.8A 0.5A 0.5A
Mounting in rack
- Slide Rail Kit, look at application notes
Package
Height: 170mm
Width: 520mm
Depth: 590mm
Gross weight: 10kg (PSU 400W); 8kg w/o PSU
Available Colors
 RAL7032 Beige      RAL9005 Black

Ordering Information Part number Description
Chassis color DL32xxx-W
DL32xxx-B
White(Beige)
Black
Power Supply DL32
DL32300(48V)
DL32350
DL32400
DL32460
DL32550
Without PSU
300W -36..72VDC input
350W
400W
460W
550W
Optional Parts List Model Description
5.25" blank cover Z5D-W
Z5D-B
Z5-W
Z5-B
Double beige 5,25" more>>
Double black 5.25" more>>
Beige 5.25" more>
Black 5.25" more>>
3.5" blank cover Z3L-W
Z3L-B
Beige 3.5" more>>
Black 3.5" more>>
2xHDD cage 2HD26 2xHDD drive holder. more>>
3xHDD cage 3HD32 3xHDD drive holder. more>>
FanMagic controller - Internal airflow temperature monitoring and WatchDog timer. more>>
Air filter F92 more>>
Xeon CPU mounting plate EBP-604-3U Protects your motherboard from breakage more>>

Сhassis DL32 with 4 HDD two - on the bottom
and two - upside down on the holder
Technical drawing of the DL32

click to view large picture

click to view large picture


PHOTOGALLERY
click to view large picture
HDDs bays extention by additional 2HD26 or 3HD32 cages
click to view large picture
Apply additional cages            2HD26 - for two HDD or 3HD32 - for three HDD,
if you want to install more than 4 HDD in the chassis. There are two places for fastening cages - on the holder like HDD. So you can place up to 8 HDD in the chassis (2 HDD - on the buttom of chassis and two cages 3HD32 with three HDD both - on the holder). The cages 2HD26 and 3HD32 are supplied as options. It is advisable to order them together with chassis.
EBP-604-3U Xeon CPU mounting plate installation
click to view large picture
Due to the weight of Xeon CPU heatsinks they must be secured to protect your motherboard from breakage. The DL32 chassis does not have any correspoding mounting holes to support direct chassis attachment of Xeon CPU heatsinks. Use the optional part - EBP-604-3U Xeon CPU mounting plate in order to fasten Xeon socket LGA 604/771 CPU heatsinks with chassis. Detalied info

ATX motherboards have standardized mounting holes to fit different types of chassis. As to CPU heatsink mounting holes - they are not standardized. Determine and spot CPU heatsink mounting holes and then fix the EBP-604-3U plates by selfadhessive tape, glue or by tiny revets. Make shure that standoffs of the plates fit perfectly to the position of CPU heatsink mounting holes at the motherboard, otherwise the CPU heatsink screws would not align to the thread. Since, the plates must be installed prior to installing the motherboard into the D34 chassis, all operations expect pre-scheming and accuracy of the stuff.

The EBP-604-3U plate is supplied as option. It is advisable to order the plate together with chassis.
Slide Rail Kit installation
click to view large picture

click to view large picture

click to view large picture
The Slide Rail Kit is supplied together with the DL32 chassis. Remove the DL32 chassis from the packaging box and check that the Kit is included. The Kit consists of two symmetric Holders - left and right.







Install 8 cage nuts in the rack (not supplied with the Kit). Note! Please make sure the salient side of each Holder (left and right) is in the opposite position in the rackmount. Reffer to the picture on the left. You should install 4 cage nuts (red marked) and tighten the both Holders with 4 appropriate screws for EACH SIDE of the rack (left and right). You need to tighten 4 screws total.





Slide the DL32 based system along the pre-installed Holders in the suitable rack. Tighten the other 4 screws on the opposite side of the front panel where it attaches to the rack.

Home  | Contact Us  | About Us |