DV Industrial Computer Ltd.
 | News | Products | Support | Ordering |   
DL43 19" 4U chassis 500mm DEEP
Form Factor
4U chassis supports for extended ATX size (305x330mm) motherboard
Dimensions(mm)
Height: 177mm
Width:  483mm
Depth: 500mm
Net weight: 11kg (9kg w/o PSU)
Expansion slots
- 7x Full-height PCI expansion slot
Drive Bays
- 11x fixed HDD bay
- 3x CDD bay
- 1x FDD bay with smile cutouts on front panel
Front Panel
LEDs:
- Hard drive activity
- Power
- Alarm
Buttons:
- Reset
- Power

Detailed description
Operating Environment (System)
Operating Temperature Range: +5~50º
System Cooling
- 2x 120x120x25 2500RPM fans, 4.22m3 total
- 1x 80x80 PSU fan
Power Supply
PSU 300W 350W 400W 460W 550W
Input Voltage  -48VDC  220VAC  220VAC  100~
240VAC 
100~
240VAC 
+3.3V 28A 22A 30A 27A 27A
+5V 30A 21A 28A 29A 29A
+5V standby 2A 2A 2A 2A 2A
-5V 0.3A 0.3A 0.3A 0.3A 0.3A
+12V1
+12V2
15A
-
16A
16A
18A
18A
16.5A
15A
18A
18A
-12V 0.8A 0.8A 0.8A 0.5A 0.5A
Mounting in rack
- Slide Holders, look at application notes
Package
Height: 210mm
Width: 510mm
Depth: 560mm
Gross weight: 12kg (10kg w/o PSU)
Available Colors
 RAL7032 Beige     RAL9005 Black

Ordering Information Part number Description
Front panel color DL43xxx-W
DL43xxx-B
White(Beige)
Black
Power Supply DL43
DL43300(48V)
DL43350
DL43400
DL43460
DL43550
Without PSU
300W -36..72VDC input
350W
400W
460W
550W

Optional Parts List Model Description
5.25" blank cover Z5D-W
Z5D-B
Z5-W
Z5-B
Double beige 5.25" more>>
Double black 5.25" more>>
Beige 5.25" more>
Black 5.25" more>>
3.5" blank cover Z3L-W
Z3L-B
Beige 3.5" more>>
Black 3.5" more>>
FanMagic controller - Internal airflow temperature monitoring and WatchDog timer. more>>

Technical drawing

Slide Holders installation
click to view large picture

click to view large picture

click to view large picture
The Slide Holders Kit is supplied together with the DL43 chassis. Remove the DL43 chassis from the packaging box and check that the Holders are included. The Kit consists of two symmetric Holders - left and right.







Install 8 cage nuts in the rack (not supplied with the Kit). Reffer to the picture on the left. You should install 4 cage nuts (red marked) and tighten the both Holders with 2 appropriate screws for EACH SIDE of the rack (left and right). You need to tighten 4 screws total.
Note! Please make sure the salient side of each Holder (left and right) is in the opposite position in the rackmount.





Slide the DL43 based system along the pre-installed Holders in the suitable rack. Tighten the other 4 screws on the opposite side of the front panel where it attaches to the rack.

Home | Contact Us | About Us |