DV Industrial Computer Ltd.
 | News  | Products  | Support  | Ordering  |   
DS12 TWIN 19" 1.5U Compact chassis 330mm DEEP
Chassis DS12, two ways mounting in rack
Two Mini-ITX motherboards were mounted inside of the chassis and each system's front panel controls included on/off switch, reset button; possibility to have face on front or back side; effectively doubling capacity with good connection options. Each system is powered by individual power supply. So, it could be two completely isolated servers inside the DS12 chassis.

Thanks to compact design chassis can be used in non-deep racks or in add-on mini-cabinets within limited spaces (twin-node server, bandwidth monitor, firewall, router).

Four chassis can be placed in the same 3U bay of standard 800mm deep rack with the help of holes in mounting brackets that allow to mount chassis with ½ U shift up or down.
Form Factor
1.5U chassis support for Micro-ATX (244x240mm) and Mini-ITX motherboard
Dimensions(mm)
Height: 66mm
Width: 483mm
Depth: 326mm
Net weight: less than 4kg
Expansion slots
- 1 horizontal Low Profile expansion slot for each motherboard/system (2 slots total)
Drive Bays
- 2 HDD bays (look at application notes below)
Front Panel
LEDs:
- Hard drive activity
- Power
- Alarm
Buttons:
- Reset
- Power

Detailed description
System Cooling
2x 60x60x20 2800RPM fans, 1,14m3/min total Find out more>>
Operating Environment (System)
Operating Temperature Range: +5~55º
Power Supply
PSU 50W DP010 50W DP011
Input Voltage Full range 100~240VAC +21~30VDC
+3.3V 3A 3A
+5V 6A 6A
+5V standby 2A 2A
+12V 2A 2A
-12V 0.1A 0.1A
Package
Height: 90mm
Width: 510mm
Depth: 330mm
Gross weight: less than 5kg
Available Colors
    RAL9005 Black

Ordering Information Part number Description
Chassis color DS12xxx-W
DS12xxx-B
White(Beige)
Black
Power Supply DS12
DS12050
DS12050-24
Without PSU
50W DP010 Full range 90V~265VAC input. Fanless!
50W DP011 +21V~30VDC input. Fanless!

Optional Parts List Model Description
2x 3.5" HDD cage 2HD26 Cage for 2x 3,5" HDD (2 flanges). Find out more>>
2x 2.5" HDD cage 2HD15 Cage for 2x 2,5" HDD (flanges left and right). Find out more>>
PCIe riser card 1U5L-e1 1.5U PCI Express x1 riser card changes the insert direction of the slot by -90 degrees. Find out more>>
1U5L-e4 1.5U PCI Express x4 riser card changes the insert direction of the slot by -90 degrees. Find out more>>
FanMagic controller FanMagic, FanMagicX Internal airflow temperature monitoring and WatchDog timer. Find out more>>

Computer in chassis DS12050
with two motherboards mini-ITX
Technical drawings
with two motherboards mini-ITX
Chassis DS12050, 2 motherboards mini-ITX, two HDD Technical drawings for DS12 chassis with 2 motherboard mini-ITX

PHOTOGALLERY
click to view large picture

DS19, left view DS12, front view DS19, right view DS19, bottom DS12, open DS12, back view DS12 in package
HDD 3.5'' installation
click to view large picture

There are 2 HDD bays on the bottom of the DS12 chassis. 2HD26 cage doubles these 2 HDD bays up to 4. So, you can put up to 4 regular HDD 3.5" in chassis when 2HD26 cages have been installed.

The cages 2HD26 are supplied as option. It is advisable to order cages together with chassis.

2.5" HDD installation
click to view large picture

click to view large picture

Apply 2HD15 cage, to install 2,5" HDD in chassis DS12. The cage consists of two flanges, they are different, so pay attantion when fastening them to HDD (look at the photo). One cage is for two 2,5" regular 9mm HDDs.

The cage you put in the regular HDD places.

You can put in chassis up to 4 2.5" HDD in two cages 2HD15 on the places of two 3.5" HDD.

The cages 2HD15 are supplied as option. It is advisable to order cages together with chassis.

Riser Card and I/O card installation
click to view large picture

click to view large picture

Riser card (1U5L-e1, 1U5L-e4) is used to change the insert direction of I/O card to the slot of motherboard by -90 degrees. The I/O card is plugged into the riser card and resides parallel with the motherboard. The DS12 case and (1U5L-e1, 1U5L-e4) riser card provide expansion for one I/O card for each motherboard (system).

If any connectors on your I/O card interfere with some metal connection straps on the back side of the DS12 chassis just cutout them by nipper. To make it easier, the connector zone of chassis' back side has been made netlike.

Riser card is supplied as option, but it is advisable to order required riser card together with chassis.


Home  | Contact Us  | About Us |