DV Industrial Computer Ltd.
 | News | Products | Support | Ordering |   
DS13 model 2004 19" 1U Ultra compact chassis 270mm DEEP
Ultra compact solution for systems based on Mini-ITX or Micro-ATX form-factor board with P4 CPU and CDD. Bi-format capability and two-faced design with good CPU cooling, effectively doubling capacity, connection options allow to migrate from Micro-ATX to Mini-ITX and back over life time of system. Thanks to compact design chassis can be used in non-deep racks or in add-on mini-cabinets within limited spaces (bandwidth monitor, firewall, router, small server).
- Two-way mounting cover with possibility to place rack brackets, CDD, I/O, power supply connectors to the front or to the back (no need to remove the unit for CDD change and routine cable maintenance)
- Two units fit back-to-back in the same 1U bay in standard 800mm deep rack with safe airflow spaces and good cooling
Form Factor
1U chassis support for Micro-ATX (244x244mm) and Mini-ITX motherboard
Height: 43mm
Width: 483mm
Depth: 270mm
Net weight: 4kg
Expansion slots
- 1x Full-height PCI expansion slot (horizontal)
Drive Bays
- 1x HDD cage when micro-ATX motherboard used or 2x HDD cage when Mini-ITX motherboard used
- 1x SlimCDD bay. Follow links to know how to fit slim CDD on the front side, on the rear side.
- 1x FDD bay with FDD cutout
Front Panel
- Hard drive activity
- Power
- Alarm
- Reset
- Power

Detailed description
System Cooling
- 3x 40x40x25 7000RPM fans, 0.72m3 total
Operating Environment (System)
Operating Temperature Range: +5~45º
Power Supply
PSU 170W 210W
Input Voltage 220VAC 220VAC
+3.3V 14A 20A
+5V 19A 20A
+5V standby 2A 2A
+12V 7A 11A
-12V 0.8A 0.4A
Height: 85mm
Width: 500mm
Depth: 330mm
Gross weight: 4.5kg
Available Colors
 RAL7032 Beige     RAL9005 Black

Ordering Information Part number Description
Chassis color DS13xxx-W
Power Supply DS13170
Backplate shield DS13-E5
DS13 chassis with "E5" plate
DS13 chassis with "E9" plate
DS13 chassis with "PD" plate
DS13 chassis with "SP" plate
DS13 chassis with "AS" plate
DS13 chassis with "GB" plate
DS13 chassis with "WD" plate
DS13 chassis with "VS" plate

Wide cutout on a back side for rear I/O connectors. This cutout is covered by special low profile shield/backplate. Multiple types of plates for the most popular Mini-ITX and micro-ATX motherboards are available (optional).
Motherboard EPIA PD Motherboard EPIA-800

Detailed information on shields

Optional Parts List Model Description
2x 2.5" HDD cage 2HD15 Cage for 2x 2,5" HDD (flanges left and right). more>>
PCI riser card 1R 1U riser changes the insert direction of the slot by 90 degrees. more>>
FanMagic controller - Internal airflow temperature monitoring and WatchDog timer. more>>

Technical drawing
micro-ATX motherboard
Technical drawing
micro-ATX motherboard
Technical drawing
Mini-ITX motherboard
Technical drawing
Mini-ITX motherboard

DS13170 with 170W PSU and Mini-ITX motherboard DS13170 with 210W PSU and micro-ATX motherboard

2,5" HDD installation in chassis DS13
Four 2.5 inch HDD in two cages 2HD15 in chassis DS13 click to view large picture
Side view of cages 2HD15 in chassis DS13
click to view large picture
Apply 2HD15 cage, to install 2,5" HDD in chassis DS13. The cage you put in the regular HDD place. One cage is for two 2,5" HDDs. You can put up to four 2.5" HDDs in two cages in DS15 chassis.The cage 2HD15 is supplied as option. It is advisable to order cage together with chassis.

Home | Contact Us | About Us |