FSP250-50SAV(PF)
Dimension : 175.6 x 84.6 x 70.5 mm
Application : For PC
Watt : 250
PFC : Passive
Safety
Features
 
  • High efficiency
  • Low ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all output
  • 100% burn-in under high ambient temperature (50°C)
  • Vacuum-impregnated transformer
  • MTBF: 100K hours at 25°C
  • 100% Hi-pot tested
  • Line input fuse protection
  • With 8cm fan
Specifications
 
  • Remote ON/OFF Control: The Power supply shall accept a logic open collector level which will disable /enable all out put voltage (excluding +5V standby).
  • Temperature range: operating 0°C~50°C storage-20°C~+65°C
  • Temperature coefficient: 0.01%°C
  • Transient response: output voltage recovers in less than 1 ms max. following a 25% load change
  • Hold-up time: 17.0 mS minimum at 115V / 60 Hz.
                        17.0 mS minimum at 230V / 50 Hz.
  • Dielectric withstand: input / output 1800VAC for1 second, input to frame ground 1800VAC for 1 second
  • Humidity: 5~95% RH
  • Efficiency: 65% min. at full load
  • Power good signal: turn-on delay 100ms to 500ms
  • Over current protection
  • Over voltage protection: +5V +3.3V +12V
  • Short circuit protection
  • Voltage: 115 / 220-230 VAC (Without PFC)/ 220-230VAC (With PFC)
  • Frequency: 47Hz to 63Hz
  • Input current: 6 amps maximum / 115 Vrms
                        3 amps maximum / 230 Vrms
  • Inrush current: 50 amps cold, 80 amps warm measured at 230 Vrms
Output
 
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb0.1A2.0A+-5%50mV P-P
-12V0.0A0.3A+-10%120mV P-P
+12V21.0A12.0A+-5%120mV P-P
+12V11.0A6.5A+-5%120mV P-P
+5V1.5A18.0A+-5%50mV P-P
+3.3V0.5A17.0A+-5%50mV P-P
* Detailed specifications and drawings provided upon request.