FSP600-80GLN
Dimension : 140 x 150 x 86mm
Application : For PC
Watt : 600
PFC : Active PFC
Safety
Features
 

• High efficiency
• Low ripple & noise
• Output over voltage protection
• Short circuit protection on all outputs
• Resettable power shut down
• Internal 12 cm fan
• 100% burn-in under high ambient temperature (50°C)
• MTBF: 100K hours at 25°C
• 100% Hi-pot tested
• Line input fuse protection
• Active PFC (Power Factor Correction) circuit
• Complies with EN61000-3-2
• AC input full range

Specifications
 
Input Specifications
• Voltage:
90-132VAC/ 115V
180-264VAC/ 230V
• Frequency: 47 Hz to 63 Hz
• Input current: 7.0 amps maximum / 115 V 
3.5 amps maximum / 230 V.
 
Output Specifications
• Over-voltage protection: +5V: 5.6V-7.0V, +3.3V: 3.76V-4.8V, 12VDC:13.5V-15.6V
• Over-current protection: +5V:48A, +3.3V: 60A, +12V1:22A, +12V2:22A, +12V3:22A, +12V4:22A 
• Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: turn-on delay 100 ms to 500 ms
 
General Specifications
• Efficiency: 80% Typical load at 115V
83% Typical load at 230V
• Hold-up time: 17.0 ms minimum: at 115V / 60 Hz
17.0 ms minimum: at 230V / 50 Hz
 
Environmental Specifications
• Operating conditions:
ambient temperature 0°C~50°C, 5~95% RH
• Storage and
  shipping conditions:
ambient temperature -20°C~80°C, 5~95% RH
Output
 
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+3.3V0.8A36A+-5%100mV P-P
+5V0.5A30A+-5%100mV P-P
+12V10A15A+-5%200mV P-P
+12V20A15A+-5%200mV P-P
+12V30.9A15A+-5%200mV P-P
+12V40.1A15A+-5%200mV P-P
-12A0A0.5A+-10%200mV P-P
+5VSB0A2.0A+-5%100mV P-P
 
* Detailed specifications and drawings provided upon request.